09.02.2012 Samsung Galaxy Precedent SCH-M828 Unbrick supported
Samsung M828 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.
To resurrect Samsung M828 do this:
Samsung M828 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.
To resurrect Samsung M828 do this:
- Solder JTAG cable to Samsung M828 JTAG pads;
- Insert battery and connect USB cable to phone and PC;
- Make sure Samsung M828 is selected in the list of models;
- Click Resurrect button;
- Wait few seconds until software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using original Samsung downloader software
to restore it to the working state.
To enter download mode:
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Down’ and ‘Camera’ keys and press Power-On to enter Download Mode;
0 komentar:
Post a Comment